pCall us toll free: +1 844 643 4273 (1-844-MIDGARD)

NDT Certification After Your Military Career, A Guide

 

It is important that you have a guide to NDT Certification After Your Military Career. The Departments of the Army, Navy, and Air Force each have a career field dedicated to inspecting a variety of components. These inspections are performed in such a way as to not damage or alter the components. Regardless of whether we call this process Nondestructive Inspection (NDI), Nondestructive Testing (NDT), or Nondestructive Evaluation (NDE), the men and women who perform it are all in the same predicament when they leave the Service; they are no longer certified.

 

Why?

 
NDT Certification After Your Military Career

Well, to answer that, we must first be clear about what it means to be certified. A certification is an employer’s way of saying they have vetted your training, experience, and ability to pass some exams, and is willing to assume the risks that are inherent in your work. If you skip steps during an inspection and miss something, you can be held accountable, and so can your employer. Additionally, the certification process is owned by each employer. Just because your last employer certified you doesn’t mean your current employer requires the same level of knowledge and experience. Aside from organizations like The American Society For Nondestructive Testing (www.asnt.org), which offers impartial third-party certifications, every certification you will ever earn will be through an employer. If you are currently serving in the military, your Service is your employer. As a matter for debate, it may be that the military does not provide a guide for NDI / NDT Certification After Your Military Career, due to retention. NDT is lucrative as a civilian and there is no incentive for the DOD to shine a light on the green grass.

 

You can earn an ASNT Level II or Level III certification (and a few others) as soon you as you are qualified and are able to pass the exams. Your military experience will provide you with a qualifications boost that most non-military technician do not have toward certification. These certifications are good for 5 years. The qualifications follow those found in SNT-TC-1A, which is an ASNT recommended practice titled, Personnel Qualification and Certification in Nondestructive Testing.

 

Let’s say you earn an ASNT certification in one or more methods and, down the road, get hired at an NDT company. Will you still need to earn a certification through this new company? It depends on their written practice.

 

What’s a written practice?

 

It is a procedure (signed document) that provides a roadmap for the qualification and certification of its employees. Every company that performs NDT has one. If your new company’s written practice is set up in accordance with SNT-TC-1A, it might allow some exams to be waived for people with current ASNT certifications. All of the options are listed in chapter 8 of SNT-TC-1A, but it is still up to the employer.

 

What if the company you want to work for certifies its employees under the NAS 410 standard? This is where things get different. National Aerospace Standard (NAS) 410 is not owned by ASNT. It is owned by Aerospace Industries Association (www.aia-aerospace.org), or simply, AIA. Revision 4 was published in late 2014, and came with some changes in the minimum experience levels required for qualification and certification. As you can imagine, NAS 410 is more stringent when it comes to what the employers can and can’t do in their written practices. NAS 410 is a standard practice. This means it must be followed exactly. SNT-TC-1A is a recommended practice. This means that it has recommendations that should be followed, but if the employer’s type of work requires deviations, they may be allowed as long as the written practice explains the reasons for them in an annex.

 

Why don’t all NDT companies just certify their employees to the less-restrictive document?

 
SNT-TC-1A does not apply to a single NDT sector. It can be used for oil and gas, wind farms, power plants, paper mills, and manufacturing, to name a few. All of these sectors have different national standards to follow and different applications, so a blanket document is not feasible.

 

NAS 410 covers aerospace (to include the manufacturing, service, and overhaul industries involved in aerospace), so it can be very specific. The Federal Aviation Administration also (www.faa.gov) has a lot to say regarding the quality of aircraft components and support equipment.

 

Think about it this way, if a wind turbine has a gear break in the middle of a wind farm, there will be damage, and possibly some injuries. If a plane has a wing break off during flight, a lot more bad things will happen. This Guide to NDT Certification After Your Military Career may help with your qualification and certification choices.

 

Here are two charts that show the differences between NAS 410 and SNT-TC-1A. There are other programs available, such as CP-189, ACCP, and IRRSP, but we will leave those for another time.

 

SNT-TC-1A Table 6.3.1 A (2011)
Method NDT Level Training Hours Experience
Minimum Hours in Method Total Hours in NDT
PT I 4 70 130
II 8 140 270
MT I 12 70 130
II 8 210 400
ET I 40 210 400
II 40 630 1200
UT I 40 210 400
II 40 630 1200
RT I 40 210 400
II 40 630 1200

 

NAS 410 Table I and Table II (2014)
Method NDT Level Training Hours Experience
Minimum Hours in Method
PT 1 16 130
2 16 270
MT 1 16 130
2 16 400
ET 1 40 200
2 40 600
UT 1 40 200
2 40 600
RT (Film or Non-film) 1 40 200
2 40 600
RT (Film and Non-film) 1 60 220
2 60 780

Table: NDT Certification After Your Military Career
 

These tables compare the five basic NDT methods. NAS 410 Revision 4 split radiography into 2 separate techniques (film and non-film). SNT-TC-1A lists 15 methods, and some of those are further broken down. For example, ET is broken down into AC Field Measurement, Eddy Current, and Remote Field Testing.

 

SNT-TC-1A appears to allow fewer experience hours for some methods, but only if you are performing more than one method. Also, for some methods, NAS 410 requires more formal training hours but less actual experience hours.

 

Isn’t NAS 410 certification supposed to be more difficult to earn?

 

NAS 410 Revision 3 required a total of 1600 experience hours in ET, UT, and RT to qualify for Level 2. That revision also allowed what was referred to as the “50% rule”. This allowed NDT technicians to claim time for multiple methods worked during a shift instead of splitting the accounting into the actual hours worked in each method during that shift. Revision 4 dropped that rule and cut the minimum experience hours in these methods in half. So, under Revision 3, you could work an 8-hour shift performing PT and MT and claim 8 hours for both as long as you performed one or the other throughout the shift. Under Revision 4, this same shift would result in something more like 4 hours for PT and 4 hours for MT.

 

Another thing to note is that the hours listed in these tables are cumulative. For example, SNT-TC-1A requires 4 hours of formal training for Level I and 8 hours of formal training for Level II. You can’t just take an 8-hour course and qualify for Level II. You need a total of 12 formal training hours for Level II. Also, in that same method, you need 130 experience hours to qualify for Level I and 270 experience hours to qualify for Level II. If you choose to skip Level I and certify straight to Level II, you will need 400 experience hours as a NDT trainee.

 

Now that we know all of this, what do you need to do?

 

All paths to NDT certification after your military career begin with qualification. You will need to prove you meet the minimum formal training hours (the tech school syllabus and certificate should suffice) and minimum experience hours. Proving your experience hours can be difficult if you haven’t kept a log throughout your career. You will need to be able to pass any applicable vision exams, and, if you are seeking Level III (or Level 3 for NAS 410) certification, you may need to provide your college degree if you are using it as a substitute for experience hours.

 

Your NDT career is in your hands. Don’t wait until you separate or retire to compile your qualification documents.

 

DOCUMENTS YOU MAY NEED FOR NDT Certification After Your Military Career

  • Resume – A resume is important. It is your first impression on paper. Spend some time crafting this. Avoid Bullet statements.
    (Example Resume)
  • Education – You will need to have official transcripts and signed training certificate(s) with dates.
    (Example Transcript) | (Example Certificate)
  • Calculate Hours (USAF Specific) – You will need to show the amount of hours you spent working each individual NDT method.
    (Example USAF Excel Spreadsheet Hours Calc)
  • Experience Affidavit – The format will differ from employer to employer. Must be signed by previous supervisor/trainer.
    (Example Affidavit)
  • References – References always help. They show you mean business and that others are willing to back you up.
    (Example References)
  • Valid State Drivers License – Most companies will prefer an employee be capable of driving. They may even ask you for a photocopy.
    (Example DL ‘Page 61’)
  • Up-to-date Passport – NDT companies may find themselves needing a technician overseas. A passport is handy for such occasions.
    (Example Passport ‘Page 55’)
  • Service Record – Your DD form 214 or proof of service letter, combined with training documents, can help verify qualification.
    (Example DD214)

Your resume may contain your goals, but consider that some NDT technicians craft entire careers performing a single NDT method. Lastly, Visual Testing (VT) is a big market out here. Your branch of service may not have VT as an actual method. If you used boroscopes, microscopes or prisms, any time in your career, attempt to obtain signed documentation of your training on the devices and the hours spent performing these tasks. It will save you some time if you wish to qualify for VT.

 

We hope this guide to NDT certification after your military career guide has been benficial.

 
We hope your next step will be to add yourself to our in-house resume filer. We may not be hiring today, but filing a resume with us may expedite any future positions with Midgard Scientific.
 

To learn more about NDT, call us at 1-844-643-4273 (1-844-MIDGARD) or visit our website at www.midgardscientific.com.

 
Permalink: NDT Certification After Your Military Career
(http://www.midgardscientific.com/article/ndt-certification-after-your-military-career/)
 

It’s tough to read the news these days without coming across an article discussing how the cost of going to college continues to rise. We all know that Ivy League schools and out-of-state tuition are expensive. However, according to The College Board, Annual Survey of Colleges, even in-state tuition at public institutions continues to rise. In fact, over the last five years, these tuition rates have increased between 3% and 54%, and all 50 states saw increases.

 

College tuition rates rise, NDT training rates remain cost effectiveWhen young adults graduate from high school, most have to choose between finding a job, and getting additional education. Some jobs, like military service, provide paid training followed by a service commitment. Many employment options for high school graduates will include entry-level manual labor. If someone earns a college degree, there is no guarantee that they will find a job that is both satisfying and high-paying. Additionally, after graduation, the bank will require monthly payments until the student loans have been paid off. To put this in perspective, a person who graduates from college with $20,000 to $40,000 in student loan debt will have a monthly payment similar to someone who bought a new car. The difference is that the student loan payment is in addition to this person’s car payment.

 

A college degree vs an NDT career is in no way an equal match. The field of Nondestructive Testing (NDT) continues to see growth year after year. Why? NDT is useful in a wide variety of applications. NDT professionals use various methods to inspect things without damaging them. Most people have seen a radiograph. The film can show a tiny bone fracture. Likewise, NDT inspectors can see cracks in various structures such as aircraft, ships, pressure vessels, bridges, sculptures, etc. Virtually anything can be inspected with one of the 15 inspection methods accepted by the recommended practice SNT-TC-1A, and the technology improves every year. Tuition prices at universities continue to rise and with state funding decreasing, universities are relying on tuition more and more. NDT wins!

 

Why might this matter to you? If you are looking for a different career or have recently graduated and have never heard of NDT, there are lots of opportunities out there. Once qualified and certified, you could work in an oil and gas field in Texas or on a pipeline in northern Alaska. You could inspect windfarms in the Midwest or fly to another country to work for 6 months and then fly home with enough money for the rest of the year. It’s up to you. There aren’t many sure things in the world these days, but continued growth in the NDT field and the increased need for qualified inspectors come pretty close to a sure thing. Most employers will pay you while you complete the formal training requirements and then place you under the supervision of an NDT Level II until you have enough experience hours. As you learn more, you can earn more.

 

The question comes down to Nondestructive Testing as a career or a college degree with no promise of an income. For more information on annual income, positions, wages etc, we recommend reviewing the PQNDT Salary Survey 2014.

 

If you are interested in formal Midgard Academy NDT Training we recommend filling out our secure information form.